Class Hierarchy

empro.toolkit.analysis.schematic_generation.ADSInstanceToDBSelectView
empro.toolkit.via_designer.geometry.AbstractConvexHullDiameterUpdater
- empro.toolkit.via_designer.geometry.ConvexHullDiameter1Updater
- empro.toolkit.via_designer.geometry.ConvexHullDiameter2Updater
empro.toolkit.via_designer.undo_redo.AbstractObserver
- empro.toolkit.via_designer.undo_redo.CheckBoxObserver
- empro.toolkit.via_designer.undo_redo.ExpressionEditObserver
- empro.toolkit.via_designer.undo_redo.GroupBoxObserver
- empro.toolkit.via_designer.undo_redo.MicroViaBarrelGroupWidgetObserver
- empro.toolkit.via_designer.undo_redo.RadioButtonObserver
- empro.toolkit.via_designer.undo_redo.SpinBoxObserver
- empro.toolkit.via_designer.undo_redo.StackupTableObserver
- empro.toolkit.via_designer.undo_redo.TableObserver
  - empro.toolkit.via_designer.undo_redo.CustomPadTableObserver
  - empro.toolkit.via_designer.undo_redo.VariableTableObserver
- empro.toolkit.via_designer.undo_redo.UiStateObserver
- empro.toolkit.via_designer.undo_redo.UtilsComboBoxObserver
empro.toolkit.via_designer.geometry.AbstractTraceAttributeUpdater
- empro.toolkit.via_designer.geometry.AntiTraceClearanceUpdater
- empro.toolkit.via_designer.geometry.FeedAngleUpdater
- empro.toolkit.via_designer.geometry.FeedCenterToCenterDistanceUpdater
- empro.toolkit.via_designer.geometry.FeedLengthUpdater
- empro.toolkit.via_designer.geometry.FeedSpacingUpdater
- empro.toolkit.via_designer.geometry.TraceLayerUpdater
- empro.toolkit.via_designer.geometry.TraceWidthUpdater
empro.toolkit.via_designer.geometry.AbstractXYZPositionUpdater
- empro.toolkit.via_designer.geometry.XPositionUpdater
- empro.toolkit.via_designer.geometry.YPositionUpdater
- empro.toolkit.via_designer.geometry.ZPositionUpdater
empro.toolkit.via_designer.undo_redo.Action
empro.ActiveProject
empro.toolkit.gui.AddDefaultMaterialDialog
empro.toolkit.via_designer.guiUtils.AddViaLayersToCopyOfSubstrateDlg
empro.toolkit.addon.AddonDefinition
empro.toolkit.eemAdfiParse.AdfiAblLibInfo
empro.toolkit.eemAdfiParse.AdfiEgsWriter: This class is used to write out .egs file.
empro.toolkit.gui.adfiImportDialog.AdfiGui
empro.toolkit.eemAdfiParse.AdfiHdefWriter: This class is used to write out .hdef file.
empro.toolkit.adfi_import.AdfiImporter
empro.toolkit.eemAdfiParse.AdfiInfo
empro.toolkit.eemAdfiParse.AdfiLayers
empro.toolkit.eemAdfiParse.AdfiLtds
empro.toolkit.gui.adsImportDialog.AdsGui
empro.Appearance: Interface to set the appearance of an object.
- empro.EdgeLineAppearanceBase: No documentation available.
  - empro.LineAppearance: No documentation available.
- empro.FaceAppearance: Interface to set the visual attributes of faces of a body.
- empro.FontAppearance: Interface to set the visual attributes of fonts applied in graphs.
- empro.MarkerAppearance: No documentation available.
- empro.WindowAppearance: Interface to set the visual attributes of windows of graphs.
empro.core.ApplicationInfo: Interface to meta information about the application such as the exact version, possible expiration dates, ...
empro.core.ApplicationPreferences: No documentation available.
empro.geometry.AssemblyListener: An object that listens on events on an Assembly.
exceptions.BaseException: Common base class for all exceptions
- exceptions.Exception: Common base class for all non-exit exceptions.
  - empro.toolkit.analysis.schematic_generation.ADSInstanceException
  - exceptions.StandardError: Base class for all standard Python exceptions that do not represent interpreter exiting.
    - exceptions.LookupError: Base class for lookup errors.
      - empro.toolkit.dataset.AmbiguityError: Exception raised by getResult if better specification of the desired dataset is required.
    - exceptions.RuntimeError: Unspecified run-time error.
  - empro.toolkit.eemAdfiParse.UnitException
bdb.Bdb: Generic Python debugger base class.
- empro.toolkit.debugger.Debugger
empro.BodyAppearance: Interface to set the visual attributes of a body.
empro.geometry.Boolean: Class that exposes the boolean operation interface.
empro.toolkit.via_designer.geometry.BoundingBox
empro.toolkit.Bunch
empro.core.Camera: A virtual camera object.
empro.core.CameraList: Manages the list of cameras.
empro.toolkit.CircuitMatrix
empro.toolkit.analysis.CircuitResultEvaluator
empro.core.CommunicationWithParent: Provides ipc and rpc interfaces to the parent when used as a child process.
empro.toolkit.dataset.ComplexDataSet: Wrapper around two DataSets to emulate a single dataset of complex numbers.
empro.toolkit.via_designer.geometry.ConicalSheetPort
empro.geometry.Connectivity: No documentation available.
empro.toolkit.analysis.ac.pdn.Constraint
_abcoll.Container
- _abcoll.Mapping: A Mapping is a generic container for associating key/value pairs.
  - empro.toolkit.dataset.DataSetMatrix: Groups a number of DataSets as a matrix
xml.sax.handler.ContentHandler: Interface for receiving logical document content events.
- empro.toolkit.analysis.NameIdContentHandler
empro.toolkit.via_designer.geometry.ConvexHullOfPads
empro.toolkit.via_designer.geometry.ConvexHullUpdater
empro.toolkit.via_designer.via_designer_state.CoordinateList
empro.toolkit.via_designer.guiUtils.CoordsAndLayersTable
empro.toolkit.via_designer.guiUtils.CoordsAndLayersTableConsts
empro.toolkit.via_designer.guiUtils.CustomMicroViaUpdaterCollections
empro.toolkit.via_designer.via_designer_state.CustomPad
empro.toolkit.via_designer.via_designer_state.CustomPadList
empro.toolkit.via_designer.mainGui.CustomPadTableConsts
empro.toolkit.analysis.dc.results.DCResults
empro.toolkit.analysis.dc.results.DCResultsDiff
empro.DataSet: No documentation available.
empro.DataSetDataSet: No documentation available.
empro.DataSetDescription: No documentation available.
empro.toolkit.debugger.DebuggerData
empro.toolkit.debugger.DebuggerToolBar
empro.toolkit.debugger.DebuggerWidget
empro.toolkit.via_designer.resultSelector.DelayedGraphInitializer
empro.toolkit.via_designer.resultSelector.DelayedGraphInitializerList
empro.toolkit.via_designer.geometry.DiameterUpdater
empro.toolkit.via_designer.geometryViewer.DummyGVWidget
empro.toolkit.via_designer.geometryViewer.DummyGeometryViewer
empro.toolkit.project.EMProProject: A Python representation of an EMPro Project by path name
empro.core.EmSubprocessIpc: IPC interface between a parent and a child process (used by both sides)
empro.core.EmSubprocessRpc: RPC interface between a parent and a child process (used by both sides).
- empro.core.EmSubprocessRpcMeta: EmSubprocessRpc wrapper which reads the name of a <method> element in the <call> and dispatches it to a slot of a QObject registered for that method.
empro.toolkit.profiler.ErrorMessage
empro.toolkit.debugger.ErrorMessage
empro.toolkit.results.excitation.Excitation
- empro.toolkit.results.excitation.CurrentSource
- empro.toolkit.results.excitation.Open
- empro.toolkit.results.excitation.ParallelRLC
- empro.toolkit.results.excitation.RLpC
- empro.toolkit.results.excitation.SeriesRLC
- empro.toolkit.results.excitation.Short
- empro.toolkit.results.excitation.VoltageSource
empro.toolkit.results.excitation_based.ExcitationBased
- empro.toolkit.results.far_field.FarField
- empro.toolkit.results.near_field.FemNearField
- empro.toolkit.results.sar.Sar
- empro.toolkit.results.system.System
  - empro.toolkit.results.system.FdtdSystem
  - empro.toolkit.results.system.FemSystem
empro.toolkit.via_designer.guiUtils.ExportToCellDlg
empro.toolkit.via_designer.geometry.FeedTracePointsUpdater
- empro.toolkit.via_designer.geometry.DiffFeedTracePointsUpdater
- empro.toolkit.via_designer.geometry.FeedAntiTracePointsUpdater
  - empro.toolkit.via_designer.geometry.FeedDiffAntiTracePointsUpdater
empro.toolkit.via_designer.guiUtils.FeedUpdaterCollections
empro.toolkit.via_designer.guiUtils.FixedComboBox
empro.toolkit.via_designer.guiUtils.FixedComboBoxStackedWidgetSelector
empro.toolkit.via_designer.geometry.FunctionCaller
empro.toolkit.via_designer.geometry.GeometryUpdaterCollection
empro.toolkit.via_designer.geometryViewer.GeometryViewer
empro.toolkit.debugger.GetChoice
empro.toolkit.profiler.GetChoice
empro.toolkit.via_designer.geometry.HorizontalMultiPinPort
empro.toolkit.analysis.dc.output.Html
- empro.toolkit.analysis.dc.output.Docx
empro.toolkit.via_designer.undo_redo.IgnoreCurrentIndexChanged
empro.toolkit.gui.InfoDialog
empro.geometry.InterconnectPathPiece: No documentation available.
_abcoll.Iterable
- _abcoll.Mapping: A Mapping is a generic container for associating key/value pairs.
  - empro.toolkit.dataset.DataSetMatrix: Groups a number of DataSets as a matrix
empro.toolkit.via_designer.geometry.Layer
empro.toolkit.via_designer.guiUtils.LayerComboBox
empro.toolkit.via_designer.guiUtils.LayerTypeConsts
empro.layout_wrapper.LayoutWrapper
empro.toolkit.via_designer.resultSelector.LogWatchStatus
empro.toolkit.long_path_util.LongPathUtil
empro.toolkit.via_designer.guiUtils.MaterialComboBox
empro.toolkit.MaterialDescription
- empro.toolkit.MaterialDescriptionAir
- empro.toolkit.MaterialDescriptionConductor
- empro.toolkit.MaterialDescriptionDielectric
- empro.toolkit.MaterialDescriptionElectricMagneticSampled
- empro.toolkit.MaterialDescriptionFreespace
- empro.toolkit.MaterialDescriptionPEC
empro.geometry.MeshFacet: A mesh facet is a part of a triangular mesh.
empro.toolkit.via_designer.guiUtils.MicroViaBarrelGroupWidget
empro.toolkit.via_designer.via_designer_state.MicroViaConnectionLabels
empro.toolkit.via_designer.guiUtils.MicroViaConnectionUpdaterCollections
empro.toolkit.via_designer.guiUtils.MicroViaCustomGroupWidget
empro.components.MultiPinExtentPin: No documentation available.
empro.toolkit.fem.NearField: NearField(<projectId>, <simulationId>) NearField(empro.activeProject, <simulationId>) NearField(context)
empro.toolkit.results.network.Network
empro.geometry.OAS3DComponentList: No documentation available.
empro.toolkit.analysis.ppr_results_overview.PPRResults
empro.toolkit.via_designer.geometry.Pad
- empro.toolkit.via_designer.geometry.BackDrill
empro.toolkit.via_designer.mainGui.PadDiameterUpdaterCollections
empro.core.Parameter: No documentation available.
empro.toolkit.via_designer.geometry.Parameter
empro.toolkit.via_designer.via_designer_state.ParameterContextFromState
empro.geometry.Plane: Interface to a plane.
empro.toolkit.via_designer.geometry.Plane
empro.toolkit.via_designer.geometry.PositionUpdater
empro.toolkit.via_designer.mainGui.PostponeFunctionCall
empro.toolkit.via_designer.guiUtils.PreviewParameterSweepDlg
empro.toolkit.profiler.Profiler
empro.toolkit.profiler.ProfilerData
empro.toolkit.profiler.ProfilerToolBar
empro.toolkit.profiler.ProfilerWidget
empro.ProjectLocation: No documentation available.
empro.geometry.Quaternion: No documentation available.
empro.toolkit.via_designer.guiUtils.RadioButtonStackedWidgetSelector
empro.toolkit.analysis.regression_tester.RegressionTester
empro.toolkit.results.Results
empro.toolkit.analysis.ppr_results_overview.ResultsOverview
empro.toolkit.analysis.results_overview.ResultsOverview
empro.toolkit.via_designer.resultSelector.ResultsTableConsts
empro.toolkit.via_designer.guiUtils.SaveAsDlg
empro.ScopedSkinListener: No documentation available.
empro.toolkit.via_designer.guiUtils.SelectSimsForExportConsts
empro.toolkit.via_designer.guiUtils.SelectSimsForExportDlg
empro.toolkit.analysis.dc.output.SenseLine
empro.toolkit.via_designer.geometry.SheetPort
empro.simulation.SimulationListListener: No documentation available.
empro.toolkit.via_designer.resultSelector.SimulationManager
empro.toolkit.via_designer.resultSelector.SimulationStatusWatcher
empro.simulation.SimulatorSetup: No documentation available.
_abcoll.Sized
- _abcoll.Mapping: A Mapping is a generic container for associating key/value pairs.
  - empro.toolkit.dataset.DataSetMatrix: Groups a number of DataSets as a matrix
empro.toolkit.via_designer.geometry.Stackup
empro.toolkit.via_designer.via_designer_state.StackupInfo
empro.toolkit.via_designer.guiUtils.StackupTable
empro.toolkit.via_designer.guiUtils.StackupTableConsts
empro.toolkit.via_designer.via_designer_state.StateList
- empro.toolkit.via_designer.via_designer_state.CustomMicroViaList
- empro.toolkit.via_designer.via_designer_state.FeedList
empro.toolkit.via_designer.via_designer_state.StateWithDictionary
- empro.toolkit.via_designer.via_designer_state.Barrel
- empro.toolkit.via_designer.via_designer_state.CustomMicroVia
- empro.toolkit.via_designer.via_designer_state.Feed
- empro.toolkit.via_designer.via_designer_state.MicroViaConnection
- empro.toolkit.via_designer.via_designer_state.MicroVias
- empro.toolkit.via_designer.via_designer_state.PadStack
- empro.toolkit.via_designer.via_designer_state.Stitching
- empro.toolkit.via_designer.via_designer_state.Variable
empro.toolkit.via_designer.via_designer_state.StringList
empro.toolkit.via_designer.guiUtils.SubstrateComboBox
empro.toolkit.via_designer.geometry.SubstrateRef
empro.datasource.TDRConfig: No documentation available.
empro.toolkit.via_designer.geometry.TestClass
empro.toolkit.analysis.dc.topology.Topology
empro.toolkit.analysis.dc.topology.TopologyConnection
empro.toolkit.analysis.dc.topology.TopologyElement
empro.toolkit.via_designer.geometry.Trace
empro.toolkit.via_designer.geometry.TracePointsUpdater
empro.toolkit.via_designer.geometry.TraceXYiUpdater
empro.geometry.Triangle: A triangle defined in 3D space.
empro.geometry.TriangleMesh
empro.toolkit.via_designer.undo_redo.UndoRedoStack
empro.units.Unit: Interface to unit objects.
empro.core.Updatable: No documentation available.
- empro.simulation.AmbientConditionSpecification: No documentation available.
- empro.simulation.AmbientConditions: No documentation available.
- empro.boundary.BoundaryConditions: Interface to set the boundary conditions.
- empro.mesh.CellSizesSpecification: Interface to the cell sizes used in the fdtd grid.
- empro.geometry.Constraint: Interface to constraints between Edges in a Sketch.
  - empro.geometry.AngleConstraint: Constructs an constraint that restricts the angle between two edges.
  - empro.geometry.ColinearConstraint: Constructs a constraint that makes the participants colinear.
  - empro.geometry.ConcentricConstraint: Constructs a constraint that makes the participants concentric.
  - empro.geometry.DistanceConstraint: Constructs a constraint that keeps a given distance between two participants.
  - empro.geometry.EqualDistanceConstraint: Constructs a constraint to match the distance between two pairs of edges.
  - empro.geometry.EqualLengthConstraint: Constructs a constraint keeping the length of two edges equal.
  - empro.geometry.EqualRadiusConstraint: Constructs a constraint keeping the radius of two edges equal.
  - empro.geometry.FixedConstraint: Fixes an edge at its current position.
    - empro.geometry.FixedAbstractPositionConstraint: No documentation available.
    - empro.geometry.FixedDirectionConstraint
    - empro.geometry.FixedPositionConstraint: Fixes an edge at a specified position
  - empro.geometry.HorizontalConstraint: Makes an edge horizontal.
  - empro.geometry.ParallelConstraint: Constructs a constraint such that two edges remain parallel.
  - empro.geometry.PerpendicularConstraint: Constructs a constraint such that two edges remain perpendicular.
  - empro.geometry.RadiusConstraint: Constructs a constraint that restricts the radius of an arc/circle.
  - empro.geometry.TangentConstraint: Constructs a constraint that makes two participants tangential.
  - empro.geometry.VerticalConstraint: Makes an edge vertical.
- empro.geometry.ConstraintManager: A collection of constraints are maintained by the ConstraintManager.
- empro.geometry.CoordinateSystem: Provides a coordinate system to facilitate the transformation of geometric data.
- empro.geometry.CoordinateSystemAbstractDirection: Abstract class for a direction in a coordinate system.
  - empro.geometry.CoordinateSystemDirection: Basic implementation of a non-parameterizable direction for use with CoordinateSystem objects.
  - empro.geometry.CoordinateSystemDirectionExpression: Concrete class for a direction in a coordinate system.
- empro.geometry.CoordinateSystemAbstractPosition: Abstract class for a position in a coordinate system.
  - empro.geometry.CoordinateSystemPosition: Basic implementation of a non-parameterizable direction for use with CoordinateSystem objects.
  - empro.geometry.CoordinateSystemPositionExpression: Concrete class for a position in a coordinate system.
  - empro.geometry.RelativePosition: No documentation available.
    - empro.geometry.RelativePositionAtCenterOfEdge: No documentation available.
    - empro.geometry.RelativePositionAtCenterOfPlanarFace: No documentation available.
    - empro.geometry.RelativePositionAtVertex: No documentation available.
    - empro.geometry.RelativePositionByLocator: No documentation available.
    - empro.geometry.RelativePositionOnEdge: No documentation available.
    - empro.geometry.RelativePositionOnFace: No documentation available.
- empro.geometry.DielectricsSizeOptions: No documentation available.
- empro.geometry.EntityIdentifier: Uniquely identifies an entity.
- empro.simulation.FOIParameters: Interface to control the frequencies of interest in a simulation.
- empro.simulation.FemEigenSolverSettings: No documentation available.
- empro.simulation.FemMeshSettings: Interface to define the mesh (refinement) settings for a FEM simulation.
- empro.mesh.FemPadding: No documentation available.
- empro.simulation.FemPerPartContent: No documentation available.
- empro.simulation.FemPerPartOverrides: No documentation available.
- empro.mesh.FixedPoint: The class that represents a fixed point.
- empro.simulation.FrequencyPlan: Frequency plan to be used during refinement.
- empro.simulation.FrequencyPlanList: interface for a frequency plan list
- empro.mesh.Grid: Interface to the fdtd grid.
- empro.mesh.GridGenerator: Interface to the fdtd grid generator.
- empro.mesh.GridParameters: Interface to optional parameters for the grid.
  - empro.mesh.ManualGridRegionParameters: Interface to optional parameters for the manual grid regions.
  - empro.mesh.PartGridParameters: Interface to optional parameters for the grid of a part.
- empro.mesh.GridRegion: Interface to grid regions.
- empro.simulation.MatrixSolver: Interface to define the settings to solve a linear system in FEM.
- empro.mesh.Mesh: No documentation available.
- empro.mesh.MeshParameters: Class for defining optional mesh parameters.
  - empro.mesh.ModelMeshParameters: No documentation available.
- empro.simulation.MomMatrixSolver: No documentation available.
- empro.simulation.MomMeshSettings: No documentation available.
- empro.simulation.MomPerPartContent: No documentation available.
- empro.simulation.MomPerPartOverrides: No documentation available.
- empro.simulation.MomPhysModel: No documentation available.
- empro.geometry.OaDesignRef: No documentation available.
- empro.output.OutputObject: No documentation available.
  - empro.output.CircuitComponentOutputObject: No documentation available.
  - empro.output.EMOutputObject: No documentation available.
    - empro.output.UserDefinedOutputObject: No documentation available.
      - empro.output.UserDefinedOutputObjectWithExcitationTransformer: No documentation available.
        
        empro.output.FemFarZoneSensorOutputObject: No documentation available.
  - empro.output.FarZoneSensorOutputObject: No documentation available.
  - empro.output.SolidSensorOutputObject: No documentation available.
  - empro.output.SurfaceSensorOutputObject: No documentation available.
    - empro.output.WaveGuidePortOutputObject: No documentation available.
  - empro.output.SystemOutputObject: No documentation available.
- empro.output.OutputObjectMetadata: No documentation available.
  - empro.output.FarZoneSensorOutputObjectMetadata: No documentation available.
  - empro.output.SystemOutputObjectMetadata: No documentation available.
- empro.simulation.PreprocessorSettings: No documentation available.
- empro.output.ProjectOutput: This class represents the output data for a specific project which may contain one or more simulations.
- empro.units.PyUnitPreferences: No documentation available.
- empro.simulation.ResourceSettings: No documentation available.
- empro.output.ResultBrowser: This class represents the entire set of requested results for the application.
- empro.output.ResultQuery: No documentation available.
- empro.output.ResultTopology: No documentation available.
- empro.output.RunOutput: No documentation available.
- empro.core.Selectable: Interface to a selectable objects.
  - empro.core.Attributable: Interface to a attributable objects.
    - empro.datasource.DataSet
      - empro.datasource.ConstantDataSet: No documentation available.
      - empro.datasource.DataSetOperation: No documentation available.
        
        empro.datasource.AssignDimensionOperation: No documentation available.
        
        empro.datasource.DimensionReducingDataSet: No documentation available.
        
        empro.datasource.Discrete1DFftDataSet: No documentation available.
        
        empro.datasource.InterpolatedDataSet: No documentation available.
        
        empro.datasource.InverseComplexMatrixDataSet: No documentation available.
        
        empro.datasource.InverseRealMatrixDataSet: No documentation available.
        
        empro.datasource.ReciprocalDataSet: No documentation available.
        
        empro.datasource.TransformDataSet: No documentation available.
      - empro.datasource.NonUniformlySampledDimension: NonUniformlySampled dimensions are discrete dimensions that hold a vector of dimension values.
      - empro.output.ResultDataSet: A proxy to a dataset retrieved from an OutputObject by means of an OutputQuery.
      - empro.datasource.UniformlySampledDimension: Uniformly sampled dimensions are a special case of discrete dimensions in that they calculate their dimension value based on a uniform sampling of the bounds and the requested index.
      - empro.datasource.UniformlySampledLogDimension: Uniformly sampled dimensions are a special case of discrete dimensions in that they calculate their dimension value based on a uniform sampling of the bounds and the requested index.
      - empro.datasource.ValueListDataSet: Dataset to represent a simple list of numeric values.
    - empro.geometry.LibraryComponentDefinition: No documentation available.
    - empro.geometry.Part: Defines the role and operations of a participant of the feature based modeling architecture.
      - empro.geometry.Assembly: An Assembly is a set of Parts grouped together.
      - empro.geometry.LibraryComponent: No documentation available.
      - empro.geometry.Model: A model is a Part that is composed of a collection of Feature objects.
        
        empro.geometry.OaModel: No documentation available.
      - empro.geometry.OaPart: No documentation available.
        
        empro.geometry.Component: A circuit component is a simulation element that can be used to excite a structure.
        
        empro.geometry.ComponentList: Manages the list of circuit components.
        
        empro.geometry.Instance: Creates an instance of the part.
        
        empro.geometry.Net: No documentation available.
        
        empro.geometry.NetList: No documentation available.
        
        empro.geometry.OaConductiveLayer: No documentation available.
        
        empro.geometry.OaDielectricLayer: No documentation available.
        
        empro.geometry.OaInterface: No documentation available.
        
        empro.geometry.OaLayout: No documentation available.
        
        empro.geometry.OaViaLayer: No documentation available.
        
        empro.geometry.Pin: No documentation available.
      - empro.geometry.PartInstance: Creates an instance of the part.
      - empro.geometry.Sketch: Interface to a sketch.
      - empro.geometry.SubDesign: No documentation available.
        
        empro.geometry.OAS3DComponent: No documentation available.
      - empro.geometry.TriangleMeshPart: A Part that encapsulates a TriangleMesh
  - empro.geometry.BondwireDefinition: Defines a bondwire profile and cross section.
  - empro.BondwireDefinitionList: Manages the list of bondwire definitions belonging to the active project
  - empro.geometry.BondwireVertex: A single vertex of a bondwire profile, specifies a horizontal and vertical offset.
  - empro.geometry.BoundingBox2D: A bounding box in 2 dimensions.
  - empro.geometry.BoundingBox3D: A bounding box in 3 dimensions.
  - empro.CircuitComponentDefinitionList: Manages the list of circuit component definitions.
  - empro.components.CircuitComponentExtent: No documentation available.
    - empro.components.BundleExtent: No documentation available.
    - empro.components.CylindricalExtent: No documentation available.
    - empro.components.DualLineExtent: No documentation available.
      - empro.components.CoaxialExtent: No documentation available.
    - empro.components.MultiPinExtent: No documentation available.
    - empro.components.SheetExtent: No documentation available.
  - empro.CircuitComponentList: Manages the list of circuit components.
  - empro.core.ComplexExpression: Interface to a complex expression.
  - empro.datasource.DataSource: This is an interface defining access to a collection of datasets.
    - empro.components.CircuitComponent: A circuit component is a simulation element that can be used to excite a structure.
    - empro.components.CircuitComponentDefinition: A circuit component definition defines the behavior model of a CircuitComponent.
      - empro.components.Diode: Defines a diode component.
      - empro.components.Feed: A Feed is a standard component definition.
      - empro.components.ModalFeed: A ModalFeed for a waveguide port sets the available power source.
      - empro.components.NonlinearCapacitor: Concrete model for a non-linear capacitor.
      - empro.components.PassiveLoad: Concrete model for a passive load.
      - empro.components.Switch: A concrete component definition to model multiple transition between open and closed circuits.
    - empro.datasource.DataSourceFromCSVFile: No documentation available.
    - empro.material.ElectricParameters: Defines the base interface for specifying parameters for electric properties of materials.
      - empro.material.ElectricDispersiveParameters: Defines the base interface for specifying parameters for electrically dispersive material properties.
        
        empro.material.ElectricDebyeDrudeParameters: Concrete class to hold parameters for electric debye/drude properties.
        
        empro.material.ElectricLorentzParameters: Concrete electric parameters class where conductivity relative permittivities, resonant frequency and damping coefficient.
      - empro.material.ElectricDjordjevicComplexPermittivityParameters: Concrete ElectricParameters class using the Svensson/Djordjevic model where a complex relative permittivity is specified at a certain evaluation frequency, next to a low and a high roll-off frequency.
      - empro.material.ElectricDjordjevicLossTangentParameters: Concrete electric parameters class using the Svensson/Djordjevic model where loss tangent and relative permittivity are given at a certain evaluation frequency, next to a low and a high roll-off frequency.
      - empro.material.ElectricNondispersiveParameters: Base class for all non-dispersive electric parameter specifications.
        
        empro.material.ElectricColeColeSingleFrequencyParameters: Concrete class to hold parameters for electric Cole-Cole properties.
        
        empro.material.ElectricFixedComplexPermittivityParameters: Concrete ElectricParameters class where frequency and complex permittivity are specified.
        
        empro.material.ElectricFixedLossTangentParameters: Concrete electric parameters class where loss tangent, frequency and relative permittivity are specified.
        
        empro.material.ElectricIndexOfRefractionParameters: Concrete electric parameters class where conductivity and index of refraction are specified.
        
        empro.material.ElectricNormalParameters: Concrete class for all non-dispersive electric parameter specifications.
        
        empro.material.ElectricSurfaceResistanceParameters: No documentation available.
      - empro.material.ElectricSampledParameters: No documentation available.
      - empro.material.PECParameters: A concrete electric parameters class to act as placeholder for PEC behavior.
    - empro.datasource.Envelope: Interface class for defining excitations in time and/or frequency.
      - empro.datasource.BartlettEnvelope: Model for a Bartlett envelope (a triangular window).
      - empro.datasource.GaussianEnvelope: Model for a Gaussian envelope.
        
        empro.datasource.GaussianDerivativeEnvelope: Model for a Gaussian derivative envelope.
    - empro.components.ImpedanceSpecification: Abstract model for specifying the impedance of a circuit component.
      - empro.components.RLCSpecification: Concrete model for specifying the RLC in a circuit component definition.
      - empro.components.SnPSpecification: No documentation available.
    - empro.material.MagneticParameters: Defines the base interface for specifying parameters for magnetic properties of materials.
      - empro.material.MagneticDispersiveParameters: Defines the base interface for specifying parameters for magnetically dispersive material properties.
        
        empro.material.MagneticDebyeDrudeParameters: Concrete magnetic parameters class for magnetic Debye-Drude parameters.
      - empro.material.MagneticNondispersiveParameters: Base class for all non-dispersive magnetic parameter specifications.
        
        empro.material.MagneticFixedComplexPermeabilityParameters: No documentation available.
        
        empro.material.MagneticFixedLossTangentParameters: Concrete magnetic parameters class where loss tangent, frequency and permeability are specified.
        
        empro.material.MagneticNormalParameters: Concrete class for all non-dispersive magnetic parameter specifications.
      - empro.material.MagneticSampledParameters: No documentation available.
      - empro.material.PMCParameters: A concrete magnetic parameters class to act as placeholder for PMC behavior.
    - empro.material.Material: The class that represents a material.
    - empro.components.ThermalResistanceSpecification: No documentation available.
      - empro.components.PackageSpecification: No documentation available.
        
        empro.components.Package3RSpecification: No documentation available.
      - empro.components.ToAmbientSpecification: No documentation available.
    - empro.components.WaveGuide: No documentation available.
    - empro.waveform.Waveform: Interface class for defining excitations in time and/or frequency.
    - empro.waveform.WaveformShape: Class that defines the shape of a waveform.
      - empro.waveform.GaussianWaveformShape: The waveform shape for the GaussianEnvelope.
        
        empro.waveform.GaussianDerivativeWaveformShape: The waveform shape for the GaussianDerivativeEnvelope.
      - empro.waveform.IEC_61000_4_2_WaveformShape: Waveform shape of the IEC 61000-4-2 EMI Pulse.
      - empro.waveform.MaximumFrequencyWaveformShape: The waveform shape for a broad band pulse.
      - empro.waveform.ModulatedGaussianWaveformShape: The waveform shape for the ModulatedGaussianEnvelope.
      - empro.waveform.RampedSinusoidWaveformShape: Creates a ramped sinusoid given a ramping envelope.
      - empro.waveform.StepWaveformShape: Step waveform for TDR simulations.
      - empro.waveform.UserDefinedWaveformShape: Creates a waveform shape based on user data.
        
        empro.waveform.TimestepSampledWaveformShape: Creates a waveform shape based on sampled data.
        
        empro.waveform.UserDefinedWaveformShapeFromCSVFile: No documentation available.
  - empro.geometry.Edge: An Edge is a basic building block of a Sketch.
    - empro.geometry.AcisEdge: No documentation available.
    - empro.geometry.Arc: An Edge type for arcs and circles within a Sketch.
    - empro.geometry.Bezier: Constructs a Bezier curve.
    - empro.geometry.Ellipse: An ellipse useable within a Sketch.
    - empro.geometry.Helix: A helix object.
    - empro.geometry.LawEdge: Realization of the Edge interface for creating a law edge..
    - empro.geometry.Line: A Line defines a line within a Sketch.
    - empro.geometry.Spiral: A spiral that can be added to a Sketch.
    - empro.geometry.Spline: A spline that can be added to a Sketch.
  - empro.material.ElectricProperties: Defines the base interface for specifying electric properties.
    - empro.material.ElectricFreespace: Container property for electric freespace.
    - empro.material.ElectricIsotropic: This is a concrete class designed to be instantiated to store parameters defining electrically isotropic material properties.
    - empro.material.EncryptedConductor: No documentation available.
    - empro.material.EncryptedDielectric: No documentation available.
    - empro.material.EncryptedSemiConductor: No documentation available.
  - empro.core.Expression: Interface to an expression.
    - empro.core.BooleanExpression: No documentation available.
  - empro.ExternalExcitationList: No documentation available.
  - empro.FarZoneSensorList: Manages the list of far zone sensors.
  - empro.geometry.Feature: A Feature is a part of a recipe describing geometric operations on sketches and features of them.
    - empro.geometry.Bend: Implementatation of the Feature interface which performs bending operations.
    - empro.geometry.Blend: Abstract model for blending operations.
      - empro.geometry.Chamfer: A concrete realization of a Blend feature.
      - empro.geometry.SimpleBlend: A simple blend is a Feature than can be used in a Recipe to blend a gives list of faces of a Part with a constant radius.
    - empro.geometry.Bondwire: Feature for building bondwires between two points.
    - empro.geometry.BooleanOperation: Performs a boolean operation on a number of parts.
    - empro.geometry.Box: Create a Box component.
    - empro.geometry.Cone: Create a Cone component.
    - empro.geometry.Cover: A sheet extend is a Feature than can be used in a Recipe to extend the bounds of a sheet body.
    - empro.geometry.Cylinder: Create a Cylinder component.
    - empro.geometry.Equation: Create a Equation component.
    - empro.geometry.ExtendSheet: A sheet extend is a Feature than can be used in a Recipe to extend the bounds of a sheet body.
    - empro.geometry.Helix3D: Create a Helix3D component.
    - empro.geometry.ImportedCadEntity: Imports the cad entity.
    - empro.geometry.Loft: Implementatation of the Feature interface which performs the act of lofting between two faces.
    - empro.geometry.ModelInstance: No documentation available.
    - empro.geometry.OffsetFaces: Implementatation of the feature interface which performs offsetFacesing operations.
    - empro.geometry.Pattern: Base class for patterns.
      - empro.geometry.CylindricalPattern: Creates a Cylindrical Pattern.
      - empro.geometry.EllipticalPattern: Creates a Elliptical Pattern.
      - empro.geometry.HexCylindricalPattern: Creates a HexCylindrical Pattern.
      - empro.geometry.HexPattern: Creates a Hex Pattern.
      - empro.geometry.LinearPattern: Creates a Linear Pattern.
      - empro.geometry.PolarGridPattern: Creates a Polar Grid Pattern.
      - empro.geometry.RadialPattern: Creates a Radial Pattern.
      - empro.geometry.SphericalPattern: Creates a Spherical Pattern.
    - empro.geometry.Prism: Create a Prism component.
    - empro.geometry.Pyramid: Create a Pyramid component.
    - empro.geometry.RemoveFaces: Implementatation of the feature interface which performs remove faces operations.
    - empro.geometry.Shell: A shell is a Feature than can be used in a Recipe to shell a Part with a given thickness.
    - empro.geometry.SolderBall: Create a SolderBall component.
    - empro.geometry.Sphere: Create a Sphere component.
    - empro.geometry.Sweep: An interface to handles sweep operations.
      - empro.geometry.Extrude: Extrudes a Sketch over a given distance in a given direction.
      - empro.geometry.Revolve: A revolve is a Feature than can be used in a Recipe to revolve a Sketch along an axis and create a body of revolution.
      - empro.geometry.SweepPath: Interface to a sweep path.
    - empro.geometry.ThickenSheet: Implementatation of the Feature interface which performs distanceFacesing operations.
    - empro.geometry.Torus: Create a Torus component.
    - empro.geometry.Trace: A sheet extend is a Feature than can be used in a Recipe to extend the bounds of a sheet body.
    - empro.geometry.Transform: Implementation for feature transformation.
      - empro.geometry.ReflectTransform: Implementatation for the reflect transformation.
      - empro.geometry.RotateTransform: Implementatation for the rotate transformation.
      - empro.geometry.ScaleTransform: Implementatation for the scale transformation.
      - empro.geometry.ShearTransform: Implementatation for the shear transformation.
      - empro.geometry.TranslateTransform: Implementatation for the translate transformation.
  - empro.GraphList: No documentation available.
  - empro.LibraryComponentDefinitionList: No documentation available.
  - empro.geometry.Locator: Encapsulates a coordinate system to facilitate positioning of parts.
  - empro.material.MagneticProperties: Defines the base interface for specifying magnetic properties.
    - empro.material.EncryptedMagnetic: No documentation available.
    - empro.material.MagneticFreespace: Container property for magentic freespace.
    - empro.material.MagneticIsotropic: This is a concrete class designed to be instantiated to store parameters defining magnetic isotropic material properties.
  - empro.material.MaterialBase: Abstract base class for materials.
    - empro.material.PhysicalMaterial: The class that represents a physical material with either or both electric and magnetic properties, and surface roughness properties.
  - empro.MaterialList: Manages the list of materials.
  - empro.NearFieldSensorList: Manages the list of near field sensors.
  - empro.datasource.OperationInput: No documentation available.
  - empro.ParameterList: Manages the list of parameters.
  - empro.simulation.ParameterSequence: No documentation available.
  - empro.material.PhysicalParameters: Defines the base interface for all physical parameters.
  - empro.geometry.PointLocation: No documentation available.
  - empro.geometry.Recipe: Interface to a recipe to build a model.
  - empro.core.ScriptList: Manages the list of scripts.
  - empro.core.SelectableList: No documentation available.
    - empro.simulation.ParameterSequenceList: No documentation available.
  - empro.sensor.Sensor: An abstract base class for objects which request that specific data be saved the next time a simulation is run.
    - empro.sensor.FarZoneSensor: Collects far-zone (distant) result data over some portion of the surface of the far-field sphere.
    - empro.sensor.NearFieldSensor: Collects data over some predefined region inside the simulation domain.
      - empro.sensor.HACSensor: This sensor performs Hearing Aid Compatibility testing on a region in space.
      - empro.sensor.PointSensor: Collects data at a single point inside the simulation domain.
      - empro.sensor.SolidSensor: Collects data on a solid inside the simulation domain.
      - empro.sensor.SurfaceSensor: Collects data on a surface inside the simulation domain.
    - empro.sensor.SARAveragingSensor: A Sensor which collects mass-averaged Specific Absorption Rate (SAR) data from a simulation.
    - empro.sensor.SARSensor: A Sensor which collects Specific Absorption Rate (SAR) data from a simulation.
    - empro.sensor.TemperatureRiseSensor: A Sensor which collects temperature rise data from a simulation.
  - empro.sensor.SensorDataDefinition: Interface to definition of the data to collect by a sensor.
    - empro.sensor.PointSensorDataDefinition: Defines which transient and steady state field data are collected at a PointSensor.
    - empro.sensor.SolidSensorDataDefinition: Defines which transient and steady state field data are collected at a SolidSensor.
    - empro.sensor.SurfaceSensorDataDefinition: Defines which transient and steady state field data are collected at a SurfaceSensor.
  - empro.core.ShortcutTree: A Shortcutgroup is a tree of ShortcutTrees.
    - empro.core.Shortcut: Shortcuts are a mechanism to refer to a another Selectable and store that into the project for later use.
    - empro.core.ShortcutGroup: A Shortcutgroup is a collection of Shortcuts.
    - empro.core.ShortcutToInstance: No documentation available.
  - empro.simulation.Simulation: createSimulation(iQueued) creates a new simulation using settings from createSimulationData and adds it to the project.
  - empro.simulation.SimulationData: Interface to control all data specific to a simulation.
  - empro.simulation.SimulationList: No documentation available.
  - empro.output.SimulationMetaData: No documentation available.
  - empro.SkinKeeper: No documentation available.
  - empro.material.SurfaceRoughnessParameters: Defines the base interface for specifying parameters for surface roughness models of materials.
    - empro.material.RoughnessHammerstadParameters: Concrete surface roughness parameters class, where rough (= h_rms) is specified.
    - empro.material.RoughnessHemisphericalParameters: Concrete surface roughness parameters class, using the multi-level hemispherical model, where rough (=htooth), bbase and dpeaks are specified for each of 3 levels.
    - empro.material.RoughnessSmoothSurfaceParameters: Concrete surface roughness parameters class, corresponding to a smooth surface (contains no parameters) .
  - empro.geometry.Vector2d: A vector in 2D space.
  - empro.geometry.Vector3d: A vector in 3D space.
  - empro.VendorPart: No documentation available.
  - empro.VendorPartList: No documentation available.
  - empro.VendorPartsDb: No documentation available.
  - empro.VendorPartsDbList: No documentation available.
  - empro.WaveGuideList: Manages the list of wave guides.
  - empro.components.WaveGuideMode: No documentation available.
  - empro.WaveformList: Manages the list of waveforms.
  - empro.core._Script: No documentation available.
    - empro.core.Script: Set of instructions that get executed by the interpreter.
- empro.SensorDataDefinitionList: Manages the list of sensor data definitions.
- empro.sensor.SensorGeometry: Describes the geometry of a NearFieldSensor.
  - empro.sensor.PointSensorGeometry: Describes the geometry of a PointSensor
    - empro.sensor.PointPositionGeometry: Single point sensor geometry defined by a CoordinateSystemAbstractPosition object.
  - empro.sensor.SolidSensorGeometry: Describes the geometry of a SolidSensor
    - empro.sensor.SolidBoxGeometry: Solid sensor geometry defined by a rectangular box in space.
    - empro.sensor.SolidPartGeometry: Solid sensor geometry defined by the geometry of a single Part object.
  - empro.sensor.SurfaceSensorGeometry: Describes the geometry of a SurfaceSensor.
    - empro.sensor.PartFacesSensorGeometry: No documentation available.
    - empro.sensor.PlaneSurfaceGeometry: Surface sensor geometry defined by a plane in space.
    - empro.sensor.RectangleSurfaceGeometry: Surface sensor geometry defined by a rectangle in space.
- empro.simulation.SimExpertItem: No documentation available.
- empro.simulation.SimExpertSettings: No documentation available.
- empro.output.SimulationOutput: No documentation available.
- empro.simulation.SingleParameterSweep: A definition of a single parameter sweep.
- empro.geometry.SweepOptions: Describes the options during a sweeping operation.
- empro.simulation.TerminationCriteria: Interface to define the termination criteria for a simulation.
- empro.sensor.TimeRange: Interface to control the time range of some sensors.
- empro.output.TopologyFilter: No documentation available.
  - empro.output.MultiPlaneFilter: No documentation available.
  - empro.output.PlaneFilter: No documentation available.
- empro.geometry.UnconnectedPadRemovalOptions: No documentation available.
- empro.simulation.VemMatrixSolver: No documentation available.
- empro.geometry.ViaArrayOptions: No documentation available.
- empro.simulation.ViaDesignerSettings: No documentation available.
UserDict.UserDict
- UserDict.IterableUserDict
  - empro.toolkit.citifile.CitiFile: Class to hold the content of a CITI file in memory as EMPro DataSets.
empro.core.Validity: Reports status of the validity of objects.
empro.toolkit.via_designer.via_designer_state.VariableList
empro.toolkit.via_designer.geometry.ViaDesignerProject
empro.toolkit.via_designer.via_designer_state.ViaDesignerState
empro.toolkit.via_designer.mainGui.ViaTabConsts
empro.toolkit.via_designer.guiUtils.WidgetEnabler
empro.toolkit.via_designer.guiUtils.WidgetVisibilityUpdater
empro.toolkit.via_designer.guiUtils.WidgetWithComboOrExpressionEdit
- empro.toolkit.via_designer.guiUtils.FeedWidget
- empro.toolkit.via_designer.guiUtils.MicroViaBarrelWidget
- empro.toolkit.via_designer.guiUtils.MicroViaConnectionWidget
- empro.toolkit.via_designer.guiUtils.MicroViaCustomWidget
empro.toolkit.gui.YesNoDialog
empro.toolkit.via_designer.zscale.ZScaleSlider
empro.toolkit.zap.ZepGui
empro.toolkit.results.far_field._Angle
- empro.toolkit.results.far_field.AlpahaEpsilon
- empro.toolkit.results.far_field.AzimuthElevation: AzimuthElevation(azimuth, elevation) arguments: azimuth --- the value of azimuth in radian elevation --- the value of elevation in radian
- empro.toolkit.results.far_field.PhiTheta: PhiTheta(phi, theta) arguments: phi --- the value of angle phi in radian theta --- the value of angle theta in radian
empro.toolkit.eemAdfiParse.bondWireWriter
empro.toolkit.eemAdfiParse.bondwireImporter
empro.toolkit.eemAdfiParse.componentImporter
empro.toolkit.eemAdfiParse.eemAdfiAblSubstWriter
empro.toolkit.via_designer.geometry.importDialog
object: The most base type
empro.toolkit.eemAdfiParse.pinWriter: This class is used to write out the .pin file of the top level of an adfi file.
empro.toolkit.eemAdfiParse.portWriter
empro.toolkit.eemAdfiParse.solderBallImporter
empro.toolkit.via_designer.via_designer_state.stateDictionary
type: type(object) -> the object's type type(name, bases, dict) -> a new type
- abc.ABCMeta: Metaclass for defining Abstract Base Classes (ABCs).
- empro._ActiveProjectMeta
empro.toolkit.adfi_import.updateProgressClass
empro.toolkit.via_designer.mainGui.varTableConsts
empro.toolkit.via_designer.mainGui.viaDesigner